Bits4Doors

Hinge: 102x76mm Square corner stainless

Only £4.20COMMERCIAL DUTY 4" x 3" BALL BEARING ARCHITECTURAL HINGES

In Polished or Satin finish Stainless Steel

This Architectural Quality hinge has been precision manufactured under British Standard BS7352 specification for use where only the highest quality is acceptable. Runs on internal ball bearings which come greased and sealed. The steel is 2.6mm thick EN. 1935 2002 Grade 13. Hinges are tested to over one million cycles on a load of 120kg (per pair). A CE marked product, supplied as a pair complete with a full set of 16 stainless steel screws.

Internal ball bearings supplied greased and sealed these hinges easily take the weight of solid oak or mahogany doors, and also are fully compatible with BS 476 Part 20:22 Fire Doors.

A Eurospec hinge.

Note: A version with rounded corners is also available, and for doors with a combined weight below 70kg a smaller version.

Hinge spec is BS EN 1935 2002 Grade 13. (actual photo - I don't use stock images)

Item is quite heavy, weighing in at 576g, but postage becomes cheaper for larger quantities.

StylePrice eachQuantity
Polished stainless (square)£4.32
Satin stainless (square)£4.20

PostageQty discount
Postage is £3.00 for the first one, £2.00 each for the next two, £1.50 for the next one, and £0.50 each for the next twenty. (UK Mainland with exclusions).You can get discount if you buy a few. £0.20 off each one if you buy 10, £0.30 off if you buy 20, £0.40 off if you buy 30, £0.50 off if you buy 40.
All prices inclusive of VAT at 20.0%

We have plenty of stock.